混流泵
(六)轴上的挡水圈可防止水沿泵轴流入轴承体内,从而保护轴承,处长使用寿命。
VI.The water deflector of axile can stop the water
running into the bearing body through the pump axile which
can protect
the bearing and lengthen the service life .
(一)安装原则
1、安装高度:视雨季或旱季不同情况具体考虑,要求吸上真空高度不**过泵的吸程。
2、安装位置的选择:尽可能靠近水源,澄迈混流泵价格,做到既保证安全、又缩短进水管路,减少扬程损失。
混流泵
1、混流泵的工作原理
由于混流泵的叶轮形状介于离心泵叶轮和轴流泵叶轮之间,因此,球铁混流泵价格,混流泵的工作原理既有离心力又有升力,靠两者的综合作用,水则以与轴组成一定角度流出叶轮,通过蜗壳室和管路把水提向高处。
2、混流泵的一般特点
(1)混流泵与离心泵相比,扬程较低,流量较大,排涝混流泵价格,与轴流泵相比,扬程较高,流量较低。适用于平原、湖区排灌。
(2)水沿混流泵的流经方向与叶轮轴成一定角度而吸入和流出的,故又称斜流泵。
7、填料发热
The padding is
hot
1、填料压得太紧或四周紧密度不够2、填料压得偏斜与轴磨损严重
1.The padding is
pressed too tight or the around compactness is not enough
2.The padding is
pressed deflected and the axile wears seriously
1、旋松压盖螺栓高速填料紧密度
2、松开压盖重新均匀地上紧
1.Loosen the gland bolts to adjust
2.Loosen the gland bolts and tighten it again.