混流泵
用户选择水泵时,较 是到农机部门认可的销售点,一定要认清生产厂家。建议**考虑购买充水式潜水电泵,门源排污混流泵,并且看清牌号和产品质量合格证。千万不能购买“三无”(即无生产厂家、无生产日期、无生产许可证)产品,否则出现了问题,用户将束手无策。
作为用户,由于受到专业知识的局限,很难定夺,较 靠而又比较成熟的产品,不失为一种明智的选择。同时,排污混流泵销售,应根据当地的电源情况来决定用单相泵或三相泵。
4、水泵使用后一定要注意保养,比如说当水泵用完后要把水泵里的水放干净,较 是能把水管卸下来然后用清水冲洗。
5、水泵上的胶带也要卸下来,然后用水冲洗干净后在光照处晾干,不要把胶带放在阴暗潮湿的地方。水泵的胶带一定不能沾上油污,更不要在胶带上涂一些带粘性的东西。
6、要仔细检查叶轮上是否有裂痕,叶轮固定在轴承上是否有松动,如果有出现裂缝和松动的现象要及时维修,如果水泵叶轮上面有泥土的也要清理干净
(二)开车前准备:
1、检查地脚螺栓的坚固情况。
2、检查传动皮带松紧程度及安装设备是否安装妥善。
3、检查进、出水管是否进气、漏水。
4、检查填料松紧是否适宜。
5、检查电动机和水泵轴心线是否在同一直线上,直联时,电动机旋转方向是否符合泵的旋转方向。
6、检查泵内有无障碍,排污混流泵供应商,轴是否卡住,用手转动应轻无杂音。
II. Preparation Before Starting
1. Check the foundation bolts if they are firm.
2. Check the degree of tightness of drive belt and check the
installation if it is suitable.
3.Check the water–in and outpipes if they are leaking water and air.
4.Check the degeree of tightness of padding if it is suitable.
5.Check the
motor and pump axile lead if they are in the same line and check the direction
of rotation of motor if it is the same with the rotation direction of pump.
6.Check the
pump if there are barriers , if the axile locks, there should be no noises when
turing it by hand.